The Right Stabilizer Makes a Difference in PVC Processing
What Are You Manufacturing?




Understand the Processing Challenge

Two Stabilizer Systems for PVC Manufacturing

Calcium-Zinc Stabilizers
Calcium-zinc stabilizers are used in PVC formulations where a calcium-based stabilizer system is required.
Selection should consider processing conditions, thermal stability, initial color, formulation compatibility and applicable market requirements.

Lead-Based Stabilizers
Lead-based stabilizers have been used in various rigid PVC formulations. Their selection depends on the technical requirements of the product and the applicable regulations in the target market.
Buyers should verify the relevant lead content, regulatory requirements and suitability for the intended application

Methyl Tin Stabilizer
Temperature control is very important during PVC processing. If the material gets too much heat, it may start to break down, causing discoloration or yellowing.
Methyl tin stabilizer helps improve the heat stability of PVC during processing, keeping the finished products clear and maintaining good color. It is commonly used by manufacturers producing transparent PVC products.
A Stabilizer Is More Than Just a Formula Ingredient
When PVC is processed at elevated temperatures, it can begin to undergo thermal degradation. If this process is not properly controlled, it may lead to discoloration and changes in the material's properties.
For PVC Profile manufacturers, the challenge is not simply to add a stabilizer. The stabilizer must work with the resin, lubricants and other additives in the formulation, while matching the processing conditions and requirements of the finished product.
In practice, different production lines may require different stabilizer systems.
Explore Our Product Grades
|
|
Grade |
Lead content* |
|
TG-302 |
28%±1 |
|
|
TG-304 |
25%±1 |
|
|
TG-320 |
30%±1 |
|
|
Grade |
Metal oxide content* |
|
TG-202 |
43.1 |
|
|
TG-203 |
40.4 |
|
|
TG-204 |
50.1 |
|
|
Grade |
Tin content (%) |
|
TG-181 |
≥19.3 |
What Should Buyers Check?
|
What to check |
Why it matters |
|
PVC product type |
Pipe, profile, board, cable or other products |
|
Processing method |
Extrusion, injection molding, calendering, etc. |
|
Processing temperature |
Helps assess thermal stability requirements |
|
Lubricant system |
Stabilizer and lubricant balance can affect processing |
|
Required product appearance |
Initial color and color consistency |
|
Regulatory requirements |
Depends on destination market and final product |
|
Technical specifications |
Check the actual TDS and test methods |
Not sure which grade to choose?
You do not need to send your entire formulation at the first inquiry. Tell us what you manufacture, which stabilizer system you currently use and what you want to improve. We recommend for you
We Look Beyond the Product
Choosing a PVC stabilizer should not be based on a product name alone.
We aim to provide clear grade information, available technical documents and product samples where applicable, so you can evaluate whether a material fits your formulation before moving forward.





